5-Axis Centroid CNC, Driver & Motor System

Description

5-Axis Centroid CNC System
Machine ready retrofit system includes controller, servos, drives, cables, handhelds, and power enclosure and hardware. All equipment was installed into a five axis machine that was never used other than for startup purposes. Fourth axis gearbox and chuck are also available. A fifth axis runs a wire feed. Their inclusion is open for discussion.
CENTROID
CONTROL
- 11084 CNC PC, Configurable to 8 Axis
- MPU11 CNC Motion Controller
- 1616 PLC Expansion Card
- 11141 A4ADA Digital to Analog
Outputs
- 11077 Operator Handheld Panel with E-Stop
- 11069 Handheld Manual Pulse Generator (MPG)
SERVO MOTORS
- Motors:
4 – Teknic M3441C-LN-16D, 10.4 ft.-lbs. peak torque
- Drives 3 – SST6000-RCX-3-1-0
- (4
th
) Drive – Teknic SSt-6000-R
- (5
th
) Drive – Pronet-E-02A
POWER
- 48 X 36 X 8 NEMA 1 Enclosure – Cover is modified. Non-pertinent components will be removed.
- Tecknic
- SSt EMF75 Rev L2 Power supply unit
- 250W 12V/24V, VF-D250-D1224A-CF